Dr.-Ing. Christoph Hirsch

Vorlesungen: Thermodynamik II


Vorlesungen: Verbrennung


Lehrstuhl: Seminar für Thermodynamik


Praktika: Wärmetechnisches Praktikum

Seidel, V., Marosky, A., Hirsch, C., Sattelmayer, T., Geng, W., Magni, F., Influence of the Inflow Confinement on the Flashback Limits of a Premixed Swirl Burner; Proceedings of ASME Turbo Expo, No. GT2013-94866, San Antonio, Texas, 2013.

Haner, E., Pernpeintner, M., Hirsch, C., Sattelmayer, T., Simultaneous Application of PLIF and MixPIV: Quantification of the Measurement Precision; Lasermethoden in der Strömungsmesstechnik, Rostock, Germany, 2012.

Pernpeintner, M., Lauer, M., Hirsch, C., Sattelmayer, T., A Method to Obtain Planar Mixture Fraction Statistics in Turbulent Flows Seeded with Tracer Particles; ASME Turbo Expo 2011, Vancouver, Canada, 2011.

Hauser, M., Hirsch, C., Sattelmayer, T., Influence of the Confinement on the Flame Transfer Function; 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil, 2011.

Fanaca, D., Alemela, P.R., Hirsch, C., Sattelmayer, T., Schuermanns, B., Comparison of the flow field of a swirl stabilized premixed burner in an annular and a single burner combustion chamber; Journal of Engineering for Gas Turbines and Power, Vol. 132, No. 6, pages 071502, 2010.

Brückner-Kalb, J., Krösser, M., Hirsch, C., Sattelmayer, T., Emission characteristics of a premixed Cyclic-Periodical-Mixing Combustor operated With hydrogen-natural gas fuel mixtures; Journal of Engineering for Gas Turbines and Power, Vol. 132, No. 2, pages 021505, 2010.

Alemela, P. R., Fanaca, D., Hirsch, C., Sattelmayer, T., Schuermans, B., Determination and scaling of thermo acoustic characteristics of premixed flames; Multi-Science Publishing, International journal of spray and combustion dynamics, Vol. 2, No. 2, 2010.

Neunert, U., Hirsch, C., Sattelmayer, T., Schreckenbach, S., Vorhersage thermoakustischer Instabilitäten in Verbrennungssystemen kleiner Leistung; Oldenbourg Industrieverlag, GWF Gas Erdgas, No. 07-08, 2010.

Neunert, U., Hirsch, C., Sattelmayer, T., A novel approach to determine the acoustic transfer matrices of laminar flat flames; The Combustion Institute, 4th European Combustion, Vienna, Austria, 2009.

Tay Wo Chong, L., Komarek, T., Zellhuber, M., Lenz, J., Hirsch, C., Polifke, W., Influence of strain and heat loss on flame stabilization in a non-adiabatic combustor; The Combustion Institute, 4th European Combustion Meeting (ECM2009), Vienna, Austria, 2009.

Weyermann, F., Hirsch, C., Sattelmayer, T., Chap. 6: Influence of boundary conditions on the noise emission of turbulent premixed swirl flames; Springer Verlag, in 'Combustion Noise' by Janicka, J., Schwarz, A., ISBN-13: 978-3642020377, pages 161-188, 2009.

Zimmermann, P., Cardenas, A., Hirsch, C., Sattelmayer, T., Simulation of a micro turbine's dynamic behavior in a biomass incineration power plant based on the pebble heater technology; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2009-59305, Orlando, FL, USA, 2009.

Wäsle, J., Winkler, A., Weyermann, F., Hirsch, C., Sattelmayer, T., A model for turbulent combustion noise; Acta Acustica united with Acustica, Vol. 95, pages 391-401, 2009.

Alemela, P.R., Fanaca, D., Ettner, F., Hirsch, C., Sattelmayer, T., Schuermans, B., Flame transfer matrices of a premixed flame and a global check with modeling and experiments; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2008-50111, Berlin, Germany, 2008.

Fanaca, D., Alemela, P.R., Ettner, F., Hirsch, C., Sattelmayer, T., Schuermans, B., Determination and comparison of the dynamic characteristics of a perfectly premixed flame in both single and annular combustion chambers; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2008-50781, Berlin, Germany, 2008.

Weyermann, F., Hirsch, C., Sattelmayer, T., Numerische Simulation der Schallabstrahlung von eingeschlossenen turbulenten Flammen; DAGA 2008, Fortschritte der Akustik, Dresden, Germany, 2008.

Wäsle, J., Winkler, A., Weyermann, F., Hirsch, C., Sattelmayer, T., Calculation of the Noise Generation by Turbulent Combustion; 2nd International Conference on Jets, Wakes and Separated Flows (ICJWSF-2008), Berlin, Germany, 2008.

Brückner-Kalb, J.R., Napravnik, C., Hirsch, C., Sattelmayer, T., Development of a fuel-air premixer for a sub-ppm NOx burner; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2007-27779, Montréal, Quebec, Canada, 2007.

Kröner, M., Sattelmayer, T., Fritz, J., Kiesewetter, F., Hirsch, C., Flame propagation in swirling flows - effect of local extinction on the combustion induced vortex breakdown; Combustion, Science and Technology, Vol. 179, Issue 7, pages 1385-1416, 2007.

Winkler, A., Wäsle, J., Hirsch, C., Sattelmayer, T., Validation of a model for premixed combustion noise with optical measurement techniques; 19th International Congress on Acoustics, Vol. 38, No. 3-4, Madrid, Spain, 2007.

Burmberger, S., Hirsch, C., Sattelmayer, T., Design rules for the velocity field of vortex breakdown swirl burners; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2006-90495, Barcelona, Spain, 2006.

Brückner-Kalb, J.R., Hirsch, C., Sattelmayer, T., Operation characteristics of a premixed sub-ppm NOx burner with periodical recirculation of combustion products; ASME Turbo Expo: Power for Land, Sea, and Air, No. ASME GT2006-90072, Barcelona, Spain, 2006.

Zimmermann, P., Hirsch, C., Sattelmayer, T., Erosion lifetime prediction for a radial turbine operation in a low dust stream; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2006-90502, Barcelona, Spain, 2006.

Freitag, E., Konle, H., Lauer, M., Hirsch, C., Sattelmayer, T., Pressure influence on the flame transfer function of a premixed swirling flame; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2006-90540, Barcelona, Spain, 2006.

Burmberger, S., Hirsch, C., Sattelmayer, T., Designing a radial swirler vortex breakdown burner; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2006-90497, Barcelona, Spain, 2006.

Auer, M.P., Hirsch, C., Sattelmayer, T., Influence of air and fuel mass flow fluctuations in a premix swirl burner on flame dynamics; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2006-90127, Barcelona, Spain, 2006.

Hirsch, C., Winkler, A., Wäsle, J., Sattelmayer, T., Calculating the turbulent noise source of premixed swirl flames from time mean reactive RANS variables; 13th International Congress on Sound and Vibration (ICSV13), Vienna, Austria, 2006.

Winkler, A., Wäsle, J., Hirsch, C., Sattelmayer, T., Peak frequency scaling of combustion noise from premixed flames; 13th International Congress on Sound and Vibration (ICSV13), Vienna, Austria, 2006.

Hirsch, C., Wäsle, J., Winkler, A., Sattelmayer, T., A spectral model for the sound pressure of turbulent premixed combustion; Proceedings of the 31st Combustion Symposium, Vol. 31, Heidelberg, Germany, 2006.

Fischer, A., Hirsch, C., Sattelmayer, T., Comparison of multi-microphone transfer matrix measurements with acoustic network models of swirl burners; Journal of Sound and Vibration, Vol. 298, Issue 1-2, pages 73-83, 2006.

Eckstein, J., Freitag, E., Hirsch, C., Sattelmayer, T., Experimental study on the role of entropy waves in low-frequency oscillations in a RQL combustor; Journal of Engineering for Gas Turbines and Power, Vol. 128, No. 2, pages 264-270, 2006.

Hirsch, C., Fanaca, D., Alemela, R., Polifke, W., Sattelmayer, T., Influence of the swirler design on flame transfer function of premixed flames; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2005-68195, Reno, NV, USA, 2005.

Wanke, E., Pieringer, J., Hirsch, C., Sattelmayer, T., Entwicklung eines eindimensionalen, transienten Verbrennungsmodells zur Simulation von Anfahrvorgängen in Porenbrennern; 17. Frühlingsakademie, Balatonfüred, Hungary, 2005.

Auer, M.P., Hirsch, C., Sattelmayer, T., Influence of the Interaction of Equivalence Ratio and Mass Flow Fluctuations on Flame Dynamics; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2005-68373, Reno, NV, USA, 2005.

Eckstein, J., Freitag, E., Hirsch, C., Sattelmayer, T., von der Bank, R., Schilling, T., Forced Low-Frequency Spray Characteristics of a Generic Airblast Swirl Diffusion Burner; Journal of Engineering for Gas Turbines and Power, Vol. 127, No. 2, pages 301-306, 2005.

Auer, M.P., Gebauer, C., Moesl, K.G., Hirsch, C., Sattelmayer, T., Active Instability Control: Feedback of Combustion Instabilities on the Injection of Gaseous Fuel; Journal of Engineering for Gas Turbines and Power, Vol. 127, No. 4, pages 748-754, 2005.

Gentemann, A., Hirsch, C., Kunze, K., Kiesewetter, F., Sattelmayer, T., Polifke, W., Validation of flame transfer function reconstruction for perfectly premixed swirl flames; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2004-53776, Vienna, Austria, 2004.

Sattelmayer, T., Hirsch, C., Krasznai, N., Wäsle, J., Winkler, A., Lärmerzeugung von Drallflammen: Charakteristika und Modellierung; Workshop BMBF Aachen, 2004.

Ibrahim, O., Zimmermann, P., Hirsch, C., Sattelmayer, T., Gerhard, B., Steinbach, C., A Microturbine Operating with Variable Heat Output; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2004-53011, Vienna, Austria, 2004.

Kunze, K., Hirsch, C., Sattelmayer, T., Transfer Function Measurements on a Swirl Stabilized Premix Burner in an Annular Combustion Chamber; ASME Turbo Expo: Power for Land, Sea and Air, No. ASME GT2004-53106, Vienna, Austria, 2004.

Sattelmayer, T., Hirsch, C., Krasznai, N., Pieringer, J., Wäsle, J., Winkler, A., Thermisch induzierter Lärm (Verbrennungslärm); Kurzlehrgang Stream Noise, Erlangen, Germany, 2004.

Kiesewetter, F., Hirsch, C., Fritz, J., Kröner, M., Sattelmayer, T., Two-Dimensional Flashback Simulation in Strongly Swirling Flows; IGTI Turbo Expo, No. ASME GT2003-38395, Atlanta, GE, USA, 2003.

Pankiewitz, C., Fischer, A., Hirsch, C., Sattelmayer, T., Computation of Transfer Matrices for Gas Turbine Combustors Including Acoustics/Flame Interaction; 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, AIAA-2003-3295, Hilton Head, SC, USA, 2003.

Hirsch, C., Küenzi, T., Knöpfel, H.P., Paikert, B., Steinbach, C., Geng, W., Döbbeling, K., An Annular Combustor Natural Gas Ignition Model derived from atmospheric Sector Experiments; 47th ASME International Gas Turbine & Aeroengine T, Amsterdam, Netherlands, 2002.

Polifke, W., Hirsch, C., Fischer, A., Sattelmayer, T., Instabilität eines Vormischbrenners mit nicht-monotoner Druckverlust-Kennlinie; VDI Bericht 1629, 20. VDI-Flammentag, pages 277-282, Essen, Germany, 2001.

von Wolfersdorf, J., Hoecker, R., Hirsch, C., Data Reduction Procedure for Transient Heat Transfer Measurements in Long Internal Cooling Channels; Journal of Heat Transfer, Vol. 120, 1998.

Hirsch, C., Polifke, W., Holzäpfel, F., Modelling Turbulent Swirling Flows: Can LES help?; Workshop DNS and LES of Complex Flows: Numerical and Modelling Aspects, University of Twente, Enschede, The Nederlands, 1997.

von Wolfersdorf, J., Hoecker, R., Hirsch, C., Data Reduction Procedure for Transient Heat Transfer Measurements in Long Internal Cooling Channels; Delft Univ. Press, 2nd Int. Symposium on Turbulence, Heat and Mass Transfer, Eds. Hanjalic & Peeters, 1997.

Mayle, R.E., Hirsch, C., Hess, S., von Wolfersdorf, J., Rotor-Stator Gap Flow Analysis and Experiments; PE-061-EC-1-05-1997, IEEE Transactions on Energy Conversion, 1997.

Hirsch, C., Leuckel, W., A curvature correction for the k-epsilon model in engineering applications; Eds. Rodi and Bergeles, 3rd. Symp. on Engineering Turbulence Modelling and Measurements, Elsevier, 1996.

Hirsch, C., Büchner, H., Leuckel, W., The formation of coherent turbulent vortex rings in periodic flow; 13. Symp. on Turbulence, No. A37, Univ. Missouri Rolla, 1994.

Bartenbach, B., Hirsch, C., Huth, M., Leuckel, W., Modelling and validation of soot concentration patterns of turbulent diffusion flames based on data from plug flow reactor experiments; Chemical Engineering and Processing, No. 33, pages 401-408, 1994.

Büchner, H., Hirsch, C., Leuckel, W., Experimental investigations on the dynamics of pulsated premixed axial flames; Comb. Sci. Tech., Vol. 94, pages 219–228, 1993.

Hirsch, C., Prade, B., Ehrhardt, K., Lenze, B., Anwendung und Bewertung iso¬thermer Turbu-lenz¬modellierung zur Berechnung des Brennernahfeldes eines Stauscheibenbrenners; GASWÄRME International, Vol. 1, No. 41, pages 17-23, 1992.

Hirsch, C., Hettel, M., Leuckel, W., Numerische Gesichtspunkte bei der Berechnung einer pulsierenden, turbulenten Strahlströmung; IBM Workshop: "Numerische Aspekte bei der Simulation von Brennkammerströmungen", No. IBM TR 75.92.22, pages 13-16, Univ. Karlsruhe, 1992.

Platzer, K.-H., Hirsch, C., Metzger, D.E., Wittig, S., Computer based areal surface temperature and local heattransfer measurements with thermochromic liquid crystals; Springer, Exp. in Fluids, Vol. 13, pages 26-32, 1992.

Leuckel, W., Hirsch, C., Lauer, G., TURBOFLAM 3.1.3.4: Mathematische Modellierung der Wechselwirkung von Turbulenz und Verbrennung unter den in Gasturbinenbrennkammern vorliegenden Bedingungen; DLR- Tagungsband, pages 143-158, 3. Statusseminar, Arbeitsgemeinschaft "Hochtemperatur Gasturbine", Köln, 1992.

Büchner, H., Hirsch, C., Leuckel, W., Investigation on the dynamics of pulsated premixed axial jet flames; Proc. Int. Symp. on Pulsating Comb., accepted to appear in Comb. Sci. Techn. Special issue 1993/94, 1991.

Hirsch, C., Hettel, M., Büchner, H., Leuckel, W., Druckschwingungen in industriellen Vormisch-Verbrennnungssystemen. Teil II: Mathematische Modellierung der pulsierenden, isothermen Strahlströmung; AIF/DVV Vorhaben Nr. 7317, DVGW- Forschungsstelle, Universität Karlsruhe, 1991.

Leuckel, W., Hirsch, C., Lauer, G., TURBOFLAM 3.1.3.4: Mathematische Modellierung der Wechselwirkung von Turbulenz und Verbrennung unter den in Gasturbinenbrennkammern vorliegenden Bedingungen; DLR-Tagungsband, pages 159-173, 2. Statusseminar, Arbeitsgemeinschaft "Hochtemperatur Gasturbine", Köln, 1990.

Hirsch, C., Platzer, K.-H., Metzger, D.E., Wittig, S., Instationäre Wärmeübergangsmessung unter Nutzung thermochromer Flüssigkristalle als Temperaturindikatoren; DGLR-Workshop 2D-Meßtechnik, Markdorf, DGLR- Bericht 88-04, p.211-221, 1988.

Hirsch, C., Metzger, D.E., Automated color recognition for liquid crystal heat transfer indication on complex surfaces using transient tests; Technical Report ERC-R-86102, Mechanical and Aerospace Engineering Dept., Arizona State University, 1987.

Hirsch, C., Automated color recognition for liquid crystal heat transfer indication on complex surfaces using transient tests; M.S. Thesis, Mechanical and Aerospace Engineering Dept., Arizona State University, 1987.

Hirsch, C., Aufbau und Inbetriebnahme eines Versuchsstandes zur instationären Wärmeübergangsmessung an rotierenden Scheiben bei erzwungener Konvektion und Prallkühlung unter Nutzung thermochromer Flüssigkristalle als Temperaturindikatoren; Diplomarbeit Nr. 302, Institut für Thermische Strömungsmaschinen, Prof.S.Wittig, Universität Karlsru, 1987.